Industrial Swinging Speedgate Turnstile Access Control For Public
The fastlane turnstile combines slim line styling with one of the
industries widest passages. It has clear, bi-directional swinging
motorized barrier panels and a stylish, architectural design that
enhances any access control installation. Its sleek design and
smaller footprint makes it compatible with any upscale business or
The fastlane turnstile controls pedestrian access between public
and secure areas. The fastlane turnstile system is provided with a
standard electric interface and can easily integrates the common
3rd party equipment with read/write facilities, such as access
control system, time & attendance system, consumption system,
ESD system and fare collection system, biometric systems
(fingerprint & face recognition), bar-code scanner, Token/ID/IC
card reader, coin collector and card collector, etc.
As a result, an orderly and civilized passage is provided for the
personnel in and out, and illegal personnel can be barred. At the
same time, a special fire control interface is equipped in the
system to meet the requirement of fire control passage, so that a
rapid down rod control may be realized in emergency for.
STANDARD FEATURES & FUNCTIONS:
-> The fastlane turnstile system can easily integrates with the
3rd party equipment, such as Biometric systems, consumption systems,
ESD system and access control system, etc.
-> Operation model: Both directions can be set as controlled
mode or free mode, two or one direction can be controlled by
switch-button or access controller.
-> Automatic check fault and alarm prompt function: to
convenient for users to maintain.
-> The running status of device can be set up through pressing
the built-in small keyboard of the main control board.
-> The device is locked until a valid open signal is received.
-> Infrared detection sensors: The device uses several infrared
sensors transmitter and receiver type. The sensors are positioned
at two different heights to defend against people trying to
roll/crawl through the lane without being detected. The sensors are
positioned at approximately knee height and waist height. The
sensors can detect abnormal access and turnstile system will stay
-> Anti-pinch function: Auto-alarm will activate for
unauthorized pedestrian movement and tailgating. The barrier uses
several photo sensors to prevent turnstile closure on a person
while inside the lane.
-> Reset automatically function: ① the gates can locked
automatically when it be forcibly pushed 10 degrees. ② “Go” signal
will be cancelled if passage through is not completed within
pre-set time. The standard default is 10 seconds (time adjustable
1s ~ 60s, by changing parameter of main control board).
-> Emergency-escape function: When power off, it will be opened
the gates automatically to meet the request of fire protection.
Also the gates will open by pressing the emergency button which can
be remote-controlled whether the power is on or not. (Optional).
-> LED indicator function: Traffic lights on both sides of the
turnstile barrier are the indicator of access status, When the
traffic lights show green, it means to pass and the red light means
no-entry. The traffic lights on both sides can be set to indicate
access for left or right or bi-direction.
-> Remote control and management function: Through the
management computer to realize remote control and management.
-> Streamline small footprint design that utilizes shared
cabinets for multi-lane applications.
-> Smooth operating motorized barriers, the entire system runs
smoothly, with a small noise and free of mechanical impact.
-> Extremely fast throughputs.
OPTIONAL & CUSTOMIZED FUNCTIONS:
-> Alternative Materials, Finished and Custom Design
-> Usage LED Counter function
-> Audio and visual alarm in the event of an invalid entry or
exit and tailgating
-> Remote Controlled Button
-> Extra add sensors transmitter and receiver type
-> Infrared sensors reset function
-> Access Control System Integration
-> Camera System Integration
-> Thermostat System Integration
-> Card Reader mounting: Card readers may be mounted on the
surface of the barrier, or the card readers may be mounted flush
mounted. There is an output to interlock the card.
-> Stroboscopic alarm light prompt function: to help for site
administrator to find the failure units fast and exactly.
304# Stainless Steel (default), 201# or 316# Stainless Steel or
Thickness of ply
brushed surface, polishing surface
Shell's size (L*W*H)
Swing arm material
Tempered glass or Acrylic (optional)
Stretching out swing length
The inductive card reader dimension
equipped with the standard mounting brackets or tailor.
Germany technological motor
DC36 servo motor
Passing speed in normally open mode
Passing speed in normally closed mode
Swing arm transmission angle
unidirectional or bi-directional
Opening / closing time
The time required to running state after power on
Automatic reset time after the failure
Mean time to failure
min. 5 000 000
-10℃ ~ +70℃
less than 95% not condensed
Indoor/Outdoor (with rain-tent cover)
relay dry contact signal; +12V level signal, pulse width >100ms,
DC12V pulse signal
RS232/ RS485 electric standard, communications range ≤1200m.
Available to connect with external CAN BUS and Ethernet
Typical areas of application are: Employee and Visitor Access
Control, Time & Attendance Integration, Loss Prevention,
Government Facilities, Buildings, Banks, Museums and Airports, etc