Stainless Steel Sliding Gate Turnstile / Access Control Turnstiles
With CE certification
It may be divided according to the combination type of core
mechanism: single-core mechanism and dual-core mechanism.
-> Single-core mechanism: RNCF2066
The sliding barrier only equipped with single-core in the cabinet
as shown in Fig.1, usually be used in single lane or multi-lane
-> Dual-core mechanism: RNCF2066S
The sliding barrier equipped with independent dual-core in the
cabinet as shown in Fig.2, usually be used in multi-lane
Sliding Gate Turnstile
304# Stainless Steel (default)
Thickness of ply
brushed surface, polishing surface or anti-fingerprint surface
Material of flap
Stretching-out flap length
Height of Sliding Gate
max of 1500mm (optional)
Germany technological motor
DC brush motor
Opening / closing time
The time required to running state after power on
Automatic reset time after the failure
Mean time to failure
min. 5 000 000
-10℃ ~ +70℃
less than 95% not condensed
Indoor/Outdoor (with rain-tent cover)
relay dry contact signal; +12V level signal or DC12V pulse signal
RS232/ RS485 electric standard, communications range≤1200m.
Typical areas of application are: Employee and Visitor Access
Control, Time & Attendance Integration, Loss Prevention,
Government Facilities, Corporate Lobbies, Buildings, Banks, Hotel,
Super market, Park, Building Sites, Museums, Retail outlets,
Railway Terminals and Airports etc.
STANDARD FEATURES & FUNCTIONS:
-> Obstacle safety detection with audible alarm, to convenient
for users to maintain and use.
-> The running status of device can be set up through pressing
the built-in small keyboard of the main control board.
-> With a variety of operating models and functions, it can be
programmed to be bi-directional access, or exit by sensors.
-> Equipped with infrared photo beam sensors, mechanical double
anti-folding feature, effectively protects against pedestrian
accidents / injuries.
-> Reset automatically, anti-tail, anti-reverse intrusion, dual
anti-pinch and stop unauthorized access.
-> Acoustic signal for announcement of unauthorised use.
-> Barrier locked in closed position to prevent force intrusion,
until a valid access control signal is received.
-> Time out reclosing feature, if never detect anyone pass thru
the barrier, will auto reclose at defined value. The standard
default is 10 seconds. (1 to 60 second adjustable);
-> Emergency-escape function: When power failure, barrier will
auto open to meet the request of fire protection. Also barrier will
open by pressing the emergency button which can be
remote-controlled whether the power is on or not. (Optional).
-> Standard fire alarm input interface, requires N.C normally
-> The turnstile system can easily integrates with the 3rd party equipment with read facilities, such as biometric reader,
consumption system, ESD system and access control system etc.
-> The turnstile system can be hooked up with multiple reader
equipments together. Rapid identification technique, available to
identify accurately and efficiently the magnetic card, bar code
card, ID/IC card, fingerprint and face detection etc.
-> Operation model: Both direction can be set as controlled
mode, free mode or disable model, two or one direction can be
controlled by switch- button or access controller. (Free model
means automatic open by infrared beam detecting, controlled model
means use valid access controller signal to open, disable model
means forbidding anyone pass thru).
-> Direction indicator function: Traffic lights on both sides of
the turnstile barrier are the indicator of access status, When the
traffic lights show green, it means to pass and the red light means
no-entry. The traffic lights on both sides can be set to indicate
access for left or right or bi-direction.
-> With normally open & normally closed working mode
-> Through the management computer to realize remote control and
-> Approved CE certificate
Shenzhen Rona Intelligent Technology Co., Ltd is a Chinese
manufacturing firm located in Shenzhen. When you are ready to find
out how we can service your needs, use the information listed here
to reach our sales and service office. Monday to Friday: 8:30am -
6:00pm (UTC/GMT +8). We look forward to hearing from you.
Head office: A603, 6F, Yousong Technology Building, E Ring 1st Rd,
Loghua Town, Bao'an, Shenzhen, China, 518109
Factory: 3F&4F, Building C, Longlian Industrial Zone, Zhonghua
Rd, Longhuan Town, Bao'an, Shenzhen, China, 518109
Contact Person: Ms. Sophia Wey
Tel: +86-755-88853586 ext 8039
Fax: +86-755-88853586 ext 8002